Experimental study on plasma jet deflection and energy extraction with MHD control

This paper presents an integrated research scheme for vector deflection and energy extraction in a gas plasma jet under Magneto-Hydrodynamic (MHD) control. A MHD-controlled thrust-vector test rig was used to conduct the experimental research. A gas plasma was obtained by injecting ionization seeds of Cs₂CO₃ into the combustion chamber via artificially forced ionization. The effects of the gas temperature and ionization seed mass fraction on the plasma jet deflection and energy extraction were experimentally verified under an applied magnetic field. The experimental results were analyzed theoretically. The results showed that the deflection amplitude of the gas plasma jet and the extracted voltage signal intensity increased with increasing gas temperature and the ionization seed mass fraction. The extracted dynamic voltage signals proved that the ionization seeds of Cs₂CO₃ induced gas ionization at 1173 K. The experiment verified that it is feasible to simultaneously achieve jet deflection and extract energy under the action of an external magnetic field.     

基于Kriging模型梯度解析解的改进一次二阶矩方法

改进一次二阶矩（AFOSM）法是一种基于功能函数梯度的结构可靠性分析方法，鉴于其对隐式函数的梯度较难求解，提出了一种基于Kriging模型梯度解析解的AFOSM方法，利用Kriging代理模型的解析表达式推导得到功能函数对输入变量的梯度解析解，为AFOSM中设计点的确定提供高精度的梯度信息。通过Kriging与AFOSM的结合，很好地解决了基于有限元模型的隐式情况下梯度计算量相当大、可靠性分析难的问题。数值与工程算例验证了所提Kriging梯度解析解的较高精确性，同时验证了所提基于Kriging解析解的AFOSM结构可靠性分析方法的正确性与较高精度。     

半球谐振陀螺全角模式控制技术研究

介绍了半球谐振陀螺全角模式的工作机理及其技术特点。对全角模式下振型的控制进行了理论分析,采用乘法相干解调对陀螺振型参数进行提取,并采用参数激励方法对谐振子进行驱动和控制。设计了数字电路进行实验,结果表明该全角模式控制技术实现了半球谐振陀螺的角速率积分功能,能够0°～360°全角度敏感输出,测得的角速度测量值超过300(°)/s,角度测量线性度优于10~(-4),与传统的力平衡模式相比,半球谐振陀螺的动态特性得到大幅提升。     

基于变刚度变阻尼的柔性喷管动态模型

针对柔性接头动态迟滞曲线受控制系统控制位置精度和动态响应速度影响较大的问题,基于电液伺服机构和柔性接头变刚度变阻尼模型,构建了柔性喷管的电液伺服机构-变刚度变阻尼模型,将其和电液伺服机构-定刚度定阻尼模型进行了对比。分析了电液伺服机构主要参数、柔性接头工作参数等对电液伺服机构-柔性接头系统动态特性的影响。分析结果表明:电液伺服机构-变刚度变阻尼模型所构造的迟滞曲线可更准确地与实验结果相吻合,并符合迟滞曲线随频率变化的规律,反馈系数、放大器静态放大系数、电液伺服机构增益、滑阀流量增益等参数对系统动态特性的影响更为明显。该模型为固体火箭发动机电液伺服机构-柔性接头系统动态特性的调整提供理论依据。     

变体辅助的无人机栖落机动模糊控制设计

无人机（Unmanned aerial vehicle， UAV）的栖落机动是一种大幅度的俯仰运动，易引起升降舵操纵力矩饱和。本文以变体方式增强无人机的俯仰操纵能力，并研究其对应的控制设计方法。首先对栖落机动建立了纵向动力学模型，并通过采用轨迹线性化和张量积变换方法转换得到T-S模糊模型。基于Lyapunov稳定理论和平方和方法，设计了满足控制输入约束的栖落机动多项式模糊控制器。对非变体与变体下的栖落机动控制过程进行了仿真，结果验证了控制律的有效性，并且表明变体辅助的无人机具有更强的操纵性能，能提高栖落机动中升降舵的抗饱和能力。     

GNSS观测数据ZTD建模的质量控制方法

针对目前基于GNSS观测数据的对流层天顶总延迟(ZTD)模型缺乏有效质量控制手段的现状,提出了一套综合考虑数据量、网格分辨率以及模型稳定性的ZTD建模质量控制方法,并采用内华达大地测量实验室(NGL)解算的高空间分辨率GNSS对流层数据,选取了近十年德国及周边区域[47°N-55°N,5°E-15°E]183个测站的实测ZTD,对该方法进行了校验。实验结果表明:在该质量控制方法下建立的新模型精度稳定,平均均方根误差(RMS)为3.4 cm,相对于UNB3m、EGNOS、GPT2w+Saas平均改善了42.4%、35.8%、33.3%。本文提出的质量控制方法有效提升了基于GNSS观测数据的ZTD模型的性能,对于ZTD建模研究具有一定的参考价值。     

高效能源系统管理与控制技术

能源系统是飞行器的关键技术之一,能源系统性能的优劣对飞行器能否正常飞行及实现预定任务有重要影响。本文针对大功率飞行器对分布式循环能源系统的管理需求,开展高效能源系统管理与控制技术研究,提出一种集逐级调压控制、限流充电控制、恒流输出控制以及最大功率点跟踪(MPPT)控制为一体的层级梯次控制策略,实现分布式系统的全局优化控制和飞行器能源的功率优化调度。研制的能源管理系统(PCU)配备1条234～328 V高压母线,额定功率15 kW,电路效率大于97%,功率密度大于750 W/kg。PCU依托分布式架构,采用层级梯次控制策略,验证了高效能源系统管理与控制技术的正确性和有效性。     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

一种未来大型天地往返运输系统平台气动方案

针对未来低运行成本、可直接水平起降、重复使用的大型天地往返运输系统平台飞行器研制所需重点解决的全速域气动力性能需求与气动热防护匹配等难题，分析了典型航天飞机方案所存在的能量运行缺陷等主要问题及可能的改善方案。基于放宽气动热防护设计、涡轮/冲压/火箭发动机三动力组合、嵌套式旋转机翼全速域变体、在爬升阶段将飞行动能转化为高度势能以及再入阶段“跳跃式”盘旋减速飞行轨迹控制等设计思想，从能量损失速率控制和回收利用等角度出发，开展了一种新型大型天地往返运输系统平台气动布局概念设计研究。全速域气动力/热性能工程估算以及内/外流整体气动效能初步分析结果表明，该方案可有效满足整个飞行包线内的升重平衡需求，相比航天飞机方案具有显著的整体气动效能优势，值得进一步开展深入研究。     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.